日本小子的中心块调整工具

老猫

中心块调整工具（Central adjustment tool）

[此贴子已经被作者于2006-3-9 21:49:39编辑过]

老猫

- What is a central adjustment of the Rubik's Cube?It is not done that this is done, and there is a considerable difference in the turning condition though it seems that it is most of one. (^^; From "It is not. ". it is easy ..new article.. to turn even if a lot of cubes are bought(^^;;

Then, it is necessary to become complete the installation condition of 6 and a central cube though it is What is the cube per "" though it is the lowest for the time being. Of course, in most cases when you buy a new cube though there is Bali in the cube or Moromoro｢?..only this respect.. awfully rotating is ..heavy... ｣It becomes it. (^^; The reason for a central cube in the respect is that it is held down of Kitsc in case of such a case compared with other central cubes. ..(.. ..cry..)

- The installation condition of six central cube in Wake was evenly made an adjusted thing. (^^) If this is not done, not coming off is a central bolt though it is a central adjustment tool of making by oneself. ..(.. sweat

[此贴子已经被作者于2006-3-9 15:35:12编辑过]

老猫

- First of all, it is from making of the central adjustment tool.
Each part are ? in easiness such as DIY shops. It is possible to buy it. (^^)

老猫

Base board

It is a metallic board of the base that becomes foundation.

老猫

L character metal fittings(largeness)

It is L character metal fittings (largeness) that become the parts of the arm that pulls a central cube.

老猫

L character metal fittings(smallness)

It is small L character metal fittings to widen the suppression area of the suppressed central core side when a central cube is pulled.

老猫

The main bolt

It is a bolt of the main to pull a central cube.

老猫

Flange nut

It is loose Tots coming ..flange nut (..) that fixes the base board and L character metal fittings (largeness), etc.

老猫

M6 volt..(.. ..short..)

It is a short M6 volt that fixes the base board and L character metal fittings, etc.

老猫

M3 screw

It is a short screw to unite as for L character metal fittings (smallness).