魔方吧·中文魔方俱乐部

标题: 恐怖的混世魔王 [打印本页]
作者: cube_master    时间: 2017-5-18 23:41:44     标题: 恐怖的混世魔王

这次继续将中块切割，首先打印的棱块是按之前的设置，如下图：

a01.jpg

后来还是觉得按以下这个设置更美观
a02.jpg

a03.jpg

下面的打乱过程只是一个棱和一个面的混合转动，感觉混乱得很恐怖，怕复原不了不敢转其它面了。
a04.jpg

a05.jpg

a06.jpg

a07.jpg

a08.jpg

a09.jpg

a10.jpg

两种不同设置的合照
a11.jpg

附件: a11.jpg (2017-5-18 23:33:45, 74.15 KB) / 下载次数 495
http://www.mf8-china.com/forum.php?mod=attachment&aid=MjYxMjQ1fGJkZWJlOGQ3fDE3NzA5MjU2MjJ8MHww

附件: a01.jpg (2017-5-18 23:32:43, 32.63 KB) / 下载次数 515
http://www.mf8-china.com/forum.php?mod=attachment&aid=MjYxMjQ0fDFkYTQ3YjA1fDE3NzA5MjU2MjJ8MHww

附件: a02.jpg (2017-5-18 23:32:43, 32.63 KB) / 下载次数 502
http://www.mf8-china.com/forum.php?mod=attachment&aid=MjYxMjQzfDFhNmJhZjI0fDE3NzA5MjU2MjJ8MHww

附件: a03.jpg (2017-5-18 23:32:43, 31.81 KB) / 下载次数 493
http://www.mf8-china.com/forum.php?mod=attachment&aid=MjYxMjQyfDAzZjRjODAxfDE3NzA5MjU2MjJ8MHww

附件: a04.jpg (2017-5-18 23:32:42, 31.42 KB) / 下载次数 508
http://www.mf8-china.com/forum.php?mod=attachment&aid=MjYxMjQxfGFhNDliZjVkfDE3NzA5MjU2MjJ8MHww

附件: a05.jpg (2017-5-18 23:32:42, 31.4 KB) / 下载次数 503
http://www.mf8-china.com/forum.php?mod=attachment&aid=MjYxMjQwfGUxMzFlNTExfDE3NzA5MjU2MjJ8MHww

附件: a06.jpg (2017-5-18 23:32:42, 32.03 KB) / 下载次数 516
http://www.mf8-china.com/forum.php?mod=attachment&aid=MjYxMjM5fDkyMDA4MTQwfDE3NzA5MjU2MjJ8MHww

附件: a07.jpg (2017-5-18 23:32:42, 31.7 KB) / 下载次数 495
http://www.mf8-china.com/forum.php?mod=attachment&aid=MjYxMjM4fDc5Mzg3NmMxfDE3NzA5MjU2MjJ8MHww

附件: a08.jpg (2017-5-18 23:32:41, 30.83 KB) / 下载次数 518
http://www.mf8-china.com/forum.php?mod=attachment&aid=MjYxMjM3fDA1ZDJmNDIxfDE3NzA5MjU2MjJ8MHww

附件: a09.jpg (2017-5-18 23:32:41, 30.93 KB) / 下载次数 534
http://www.mf8-china.com/forum.php?mod=attachment&aid=MjYxMjM2fDM2NGVlN2IwfDE3NzA5MjU2MjJ8MHww

附件: a10.jpg (2017-5-18 23:32:41, 30.77 KB) / 下载次数 503
http://www.mf8-china.com/forum.php?mod=attachment&aid=MjYxMjM1fGZkYjRhNGFkfDE3NzA5MjU2MjJ8MHww
作者: 小希    时间: 2017-5-18 23:51:35

贴片的质感感觉很好看，期待早日上市
作者: 佐助    时间: 2017-5-18 23:59:58

6加8轴    这个有点麻烦
作者: 魔道窈女    时间: 2017-5-19 06:11:46

看着好难啊  贴片儿的 我喜欢 期待ing
作者: 野 子    时间: 2017-5-19 06:15:29

居然是贴片，贴片容易脱落的问题是如何解决的呢？特别是特别小的贴片如何粘贴牢呢？
作者: L08    时间: 2017-5-19 06:17:44

不想玩了！！！！
作者: luckybox    时间: 2017-5-19 06:28:08

这个也忒难了，到时候买一个研究研究
作者: 黑白子    时间: 2017-5-19 08:36:40

支持早日量产！
作者: moshav2    时间: 2017-5-19 08:59:53

期待啊。。。
作者: 鬼魔    时间: 2017-5-19 09:06:29

太高级了  眼有点晕啊  哈哈
作者: 鬼魔    时间: 2017-5-19 09:09:58

我在想  这种魔方有几个人会拧呢？谁会的在这报个名吧！
作者: redcarrot    时间: 2017-5-19 09:42:16

确实很恐怖啊……
作者: cube_master    时间: 2017-5-19 11:48:08

野 子 发表于 2017-5-19 06:15
居然是贴片，贴片容易脱落的问题是如何解决的呢？特别是特别小的贴片如何粘贴牢呢？

魔方和贴片材料都是PLA，用PLA专用胶水不容易脱落。
作者: otischeng    时间: 2017-5-19 12:20:53

確實很恐怖, 這個系列要是推出的話, 我覺得我只入手一款經典版和另一款稍難的就好了.
作者: raka    时间: 2017-5-19 13:20:08

大赞特赞！
作者: foreverlucklife    时间: 2017-5-19 14:00:53

感觉还会继续切。。
作者: 我是老大粉丝    时间: 2017-5-19 16:24:47

期待量产啊
作者: ！！！！    时间: 2017-5-19 17:11:15

这怎么玩啊
作者: xiaoli    时间: 2017-5-19 19:14:41

好恐怖 估计我还原不了
作者: 刘超    时间: 2017-5-19 20:47:06

老大都觉得恐怖，那就无敌恐怖了
作者: wending    时间: 2017-5-19 22:10:21

高级，不错！
作者: 滄龍    时间: 2017-5-19 22:31:50

太强了，期待上市！
作者: hubo5563    时间: 2017-5-20 17:57:59

相当复杂，怎么切割的都想不清楚。
作者: 折翼蚂蝗    时间: 2017-5-20 18:22:43

老大的设计思路值得称赞！从最简单的情况开始，不断增加切割，步步为营走向复杂。佩服！
最初看到前几个帖子是，感觉切割不对称，不喜欢。现在看来要往全对称的方向发展，而且转动方式这么多，看来之前我轻视它了
期待早日设计完毕，早日量产！
作者: xiaoli    时间: 2017-5-21 11:42:07

老大这个系列就算不玩 买来摆也是一种高逼格
作者: 至尊达哥    时间: 2017-5-21 11:46:38

恐怖......现在的魔方真是越来越变态了...
作者: zaybxc    时间: 2017-5-21 13:48:00

绝对适合观赏的魔方！
作者: AfterStory    时间: 2017-5-21 21:06:19

看起来好复杂啊
作者: ian_wood    时间: 2017-5-22 18:08:34

别再切了，再切没法玩了
作者: 鬼魔    时间: 2017-5-23 18:32:36

这魔方有点儿不可思议
作者: 也非小人物    时间: 2017-5-24 10:02:21

这个魔方太牛逼了吧，直接不敢想啊
作者: tan90°    时间: 2017-5-26 16:57:47

我勒个去……………………量产吧~~~套装~~~~
作者: eliasacrich    时间: 2017-5-26 18:01:50

Awesome!!! I cannot wait until these series of puzzles comes out to the market!
作者: tengda    时间: 2017-5-26 20:26:49

量产吗？老大。
作者: POP帝1    时间: 2017-5-28 13:48:05

本帖最后由 POP帝1 于 2017-6-17 18:55 编辑

****************
作者: POP帝1    时间: 2017-5-28 13:49:37

本帖最后由 POP帝1 于 2017-6-17 18:54 编辑

接楼上：
Super Mixup IV-d：
  1. <?xml version="1.0" encoding="windows-1251"?>
  2. <xml Data_Version="2">

  4.     <Interface>
  5.         <Name>Super Mixup IV-d</Name>
  6.         <Menu>Other cubes\Mixup\Super Mixup IV-d</Menu>
  7.         <Inventor>MF8</Inventor>
  8.         <Programmer>Evgeniy Grigoriev</Programmer>
  9.         <Link>http://bbs.mf8-china.com/forum.php?mod=viewthread&amp;tid=107262</Link>
  10.         <Added>2017-03-28</Added>
  11.     </Interface>

  13.     <Script>
  14.         clBlue    := '00FFFF';
  15.         clGreen   := '00FF00';
  16.         clFuchsia := 'FF30FF';
  17.         clOrange  := 'FF800A';
  18.         clYellow  := 'FFFF00';
  19.         clGray    := 'C0C0C0';

  21.         W := (2 * sqrt(2) + 1) / 14;
  22.     </Script>

  24.     <Axes TurningAngles = "Pi / 4; 0; Pi / 4" PlaneDistances = "-W; W" >
  25.         <Axis NormVector = " 1;  0;  0" />
  26.         <Axis NormVector = " 0;  1;  0" />
  27.         <Axis NormVector = " 0;  0;  1" />
  28.     </Axes>

  30.     <Axes TurningAngles = "Pi / 2; 0; Pi / 2" PlaneDistances = "-W; W" >
  31.         <Axis NormVector = " 0;  1;  1" />
  32.         <Axis NormVector = " 1;  0;  1" />
  33.         <Axis NormVector = " 0; -1;  1" />
  34.         <Axis NormVector = "-1;  0;  1" />
  35.         <Axis NormVector = "-1;  1;  0" />
  36.         <Axis NormVector = " 1;  1;  0" />
  37.     </Axes>

  39.     <Figure>
  40.         <Part>
  41.             <Vertices>
  42.                 <Vector X = "-0.5" Y = "-0.5" Z = "-0.5" />
  43.                 <Vector X = "-0.5" Y = "-0.5" Z =  "0.5" />
  44.                 <Vector X = "-0.5" Y =  "0.5" Z = "-0.5" />
  45.                 <Vector X = "-0.5" Y =  "0.5" Z =  "0.5" />
  46.                 <Vector X =  "0.5" Y = "-0.5" Z = "-0.5" />
  47.                 <Vector X =  "0.5" Y = "-0.5" Z =  "0.5" />
  48.                 <Vector X =  "0.5" Y =  "0.5" Z = "-0.5" />
  49.                 <Vector X =  "0.5" Y =  "0.5" Z =  "0.5" />
  50.             </Vertices>

  52.             <Faces>
  53.                 <Face Color = "clOrange " VertexIndexes = "1;0;4;5" />
  54.                 <Face Color = "clFuchsia" VertexIndexes = "2;3;7;6" />
  55.                 <Face Color = "clGreen  " VertexIndexes = "0;1;3;2" />
  56.                 <Face Color = "clBlue   " VertexIndexes = "5;4;6;7" />
  57.                 <Face Color = "clGray   " VertexIndexes = "0;2;6;4" />
  58.                 <Face Color = "clYellow " VertexIndexes = "3;1;5;7" />
  59.             </Faces>
  60.         </Part>

  62.         <Split Axis = "0" From  = "1" />
  63.         <Split Axis = "0" From  = "2" />
  64.         <Split Axis = "1" From  = "1" />
  65.         <Split Axis = "1" From  = "2" />
  66.         <Split Axis = "2" From  = "1" />
  67.         <Split Axis = "2" From  = "2" />

  69.         <Hide Axis = "0" Layer = "0" />
  70.         <Hide Axis = "0" Layer = "2" />
  71.         <Turn Axis = "2" Angle = "Pi / 4" Layer = "0" />
  72.         <Turn Axis = "2" Angle = "Pi / 4" Layer = "2" />

  74.         <Split Axis = "0" From  = "1" />
  75.         <Split Axis = "0" From  = "2" />
  76.         <Split Axis = "1" From  = "1" />
  77.         <Split Axis = "1" From  = "2" />
  78.         <Split Axis = "2" From  = "1" />
  79.         <Split Axis = "2" From  = "2" />

  81.         <Turn Axis = "2" Angle = "-Pi / 4" Layer = "2" />
  82.         <Turn Axis = "2" Angle = "-Pi / 4" Layer = "0" />
  83.         <ShowAll/>

  85.         <Hide Axis = "1" Layer = "0" />
  86.         <Hide Axis = "1" Layer = "2" />
  87.         <Turn Axis = "0" Angle = "Pi / 4" Layer = "0" />
  88.         <Turn Axis = "0" Angle = "Pi / 4" Layer = "2" />

  90.         <Split Axis = "0" From  = "1" />
  91.         <Split Axis = "0" From  = "2" />
  92.         <Split Axis = "1" From  = "1" />
  93.         <Split Axis = "1" From  = "2" />
  94.         <Split Axis = "2" From  = "1" />
  95.         <Split Axis = "2" From  = "2" />

  97.         <Turn Axis = "0" Angle = "-Pi / 4" Layer = "2" />
  98.         <Turn Axis = "0" Angle = "-Pi / 4" Layer = "0" />
  99.         <ShowAll/>

  101.         <Hide Axis = "2" Layer = "0" />
  102.         <Hide Axis = "2" Layer = "2" />
  103.         <Turn Axis = "1" Angle = "Pi / 4" Layer = "0" />
  104.         <Turn Axis = "1" Angle = "Pi / 4" Layer = "2" />

  106.         <Split Axis = "0" From  = "1" />
  107.         <Split Axis = "0" From  = "2" />
  108.         <Split Axis = "1" From  = "1" />
  109.         <Split Axis = "1" From  = "2" />
  110.         <Split Axis = "2" From  = "1" />
  111.         <Split Axis = "2" From  = "2" />

  113.         <Turn Axis = "1" Angle = "-Pi / 4" Layer = "2" />
  114.         <Turn Axis = "1" Angle = "-Pi / 4" Layer = "0" />
  115.         <ShowAll/>

  117.         <Turn Axis = "0" Angle = "Pi / 2" Layer = "0" />
  118.         <Turn Axis = "0" Angle = "Pi / 2" Layer = "2" />
  119.         <Split Axis = "7" From  = "1" />
  120.         <Split Axis = "7" From  = "2" />
  121.         <Split Axis = "8" From  = "1" />
  122.         <Split Axis = "8" From  = "2" />
  123.         <Turn Axis = "0" Angle = "-Pi / 2" Layer = "2" />
  124.         <Turn Axis = "0" Angle = "-Pi / 2" Layer = "0" />

  126.         <Turn Axis = "2" Angle = "Pi / 2" Layer = "0" />
  127.         <Turn Axis = "2" Angle = "Pi / 2" Layer = "2" />
  128.         <Split Axis = "4" From  = "1" />
  129.         <Split Axis = "4" From  = "2" />
  130.         <Split Axis = "6" From  = "1" />
  131.         <Split Axis = "6" From  = "2" />
  132.         <Turn Axis = "2" Angle = "-Pi / 2" Layer = "2" />
  133.         <Turn Axis = "2" Angle = "-Pi / 2" Layer = "0" />

  135.         <Turn Axis = "2" Angle = "Pi" Layer = "0" />
  136.         <Turn Axis = "2" Angle = "Pi" Layer = "2" />
  137.         <Turn Axis = "0" Angle = "-Pi / 2" Layer = "0" />
  138.         <Turn Axis = "0" Angle = "-Pi / 2" Layer = "2" />
  139.         <Turn Axis = "7" Angle = "Pi / 2" Layer = "0" />
  140.         <Turn Axis = "7" Angle = "Pi / 2" Layer = "2" />
  141.         <Turn Axis = "2" Angle = "-Pi / 4" Layer = "0" />
  142.         <Turn Axis = "2" Angle = "-Pi / 4" Layer = "2" />
  143.         <Split Axis = "7" From  = "1" />
  144.         <Split Axis = "7" From  = "2" />
  145.         <Turn Axis = "2" Angle = "Pi / 2" Layer = "0" />
  146.         <Turn Axis = "2" Angle = "Pi / 2" Layer = "2" />
  147.         <Split Axis = "7" From  = "1" />
  148.         <Split Axis = "7" From  = "2" />
  149.         <Turn Axis = "2" Angle = "-Pi / 4" Layer = "2" />
  150.         <Turn Axis = "2" Angle = "-Pi / 4" Layer = "0" />
  151.         <Turn Axis = "7" Angle = "-Pi / 2" Layer = "2" />
  152.         <Turn Axis = "7" Angle = "-Pi / 2" Layer = "0" />
  153.         <Turn Axis = "0" Angle = "Pi / 2" Layer = "2" />
  154.         <Turn Axis = "0" Angle = "Pi / 2" Layer = "0" />

  156.         <Turn Axis = "2" Angle = "-Pi / 2" Layer = "0" />
  157.         <Turn Axis = "2" Angle = "-Pi / 2" Layer = "2" />
  158.         <Turn Axis = "6" Angle = "Pi / 2" Layer = "0" />
  159.         <Turn Axis = "6" Angle = "Pi / 2" Layer = "2" />
  160.         <Turn Axis = "1" Angle = "-Pi / 4" Layer = "0" />
  161.         <Turn Axis = "1" Angle = "-Pi / 4" Layer = "2" />
  162.         <Split Axis = "6" From  = "1" />
  163.         <Split Axis = "6" From  = "2" />
  164.         <Turn Axis = "1" Angle = "Pi / 2" Layer = "0" />
  165.         <Turn Axis = "1" Angle = "Pi / 2" Layer = "2" />
  166.         <Split Axis = "6" From  = "1" />
  167.         <Split Axis = "6" From  = "2" />
  168.         <Turn Axis = "1" Angle = "-Pi / 4" Layer = "2" />
  169.         <Turn Axis = "1" Angle = "-Pi / 4" Layer = "0" />
  170.         <Turn Axis = "6" Angle = "-Pi / 2" Layer = "2" />
  171.         <Turn Axis = "6" Angle = "-Pi / 2" Layer = "0" />
  172.         <Turn Axis = "2" Angle = "Pi / 2" Layer = "2" />
  173.         <Turn Axis = "2" Angle = "Pi / 2" Layer = "0" />
  174.         <Turn Axis = "2" Angle = "Pi" Layer = "2" />
  175.         <Turn Axis = "2" Angle = "Pi" Layer = "0" />
  176.         <RemoveGrayParts/>
  177.     </Figure>
  178. </xml>
复制代码
作者: POP帝1    时间: 2017-6-1 10:55:41

本帖最后由 POP帝1 于 2017-6-17 18:53 编辑

34#又被吞了，干脆重发一个。。。。。。
  1. <?xml version="1.0" encoding="windows-1251"?>
  2. <xml Data_Version="2">

  4.     <Interface>
  5.         <Name>Super Mixup IV-c</Name>
  6.         <Menu>Other cubes\Mixup\Super Mixup IV-c</Menu>
  7.         <Inventor>MF8</Inventor>
  8.         <Programmer>Evgeniy Grigoriev</Programmer>
  9.         <Link>http://bbs.mf8-china.com/forum.php?mod=viewthread&amp;tid=107262</Link>
  10.         <Added>2017-03-28</Added>
  11.     </Interface>

  13.     <Script>
  14.         clBlue    := '00FFFF';
  15.         clGreen   := '00FF00';
  16.         clFuchsia := 'FF30FF';
  17.         clOrange  := 'FF800A';
  18.         clYellow  := 'FFFF00';
  19.         clGray    := 'C0C0C0';

  21.         W := (2 * sqrt(2) + 1) / 14;
  22.     </Script>

  24.     <Axes TurningAngles = "Pi / 4; 0; Pi / 4" PlaneDistances = "-W; W" >
  25.         <Axis NormVector = " 1;  0;  0" />
  26.         <Axis NormVector = " 0;  1;  0" />
  27.         <Axis NormVector = " 0;  0;  1" />
  28.     </Axes>

  30.     <Axes TurningAngles = "Pi / 2; 0; Pi / 2" PlaneDistances = "-W; W" >
  31.         <Axis NormVector = " 0;  1;  1" />
  32.         <Axis NormVector = " 1;  0;  1" />
  33.         <Axis NormVector = " 0; -1;  1" />
  34.         <Axis NormVector = "-1;  0;  1" />
  35.         <Axis NormVector = "-1;  1;  0" />
  36.         <Axis NormVector = " 1;  1;  0" />
  37.     </Axes>

  39.     <Figure>
  40.         <Part>
  41.             <Vertices>
  42.                 <Vector X = "-0.5" Y = "-0.5" Z = "-0.5" />
  43.                 <Vector X = "-0.5" Y = "-0.5" Z =  "0.5" />
  44.                 <Vector X = "-0.5" Y =  "0.5" Z = "-0.5" />
  45.                 <Vector X = "-0.5" Y =  "0.5" Z =  "0.5" />
  46.                 <Vector X =  "0.5" Y = "-0.5" Z = "-0.5" />
  47.                 <Vector X =  "0.5" Y = "-0.5" Z =  "0.5" />
  48.                 <Vector X =  "0.5" Y =  "0.5" Z = "-0.5" />
  49.                 <Vector X =  "0.5" Y =  "0.5" Z =  "0.5" />
  50.             </Vertices>

  52.             <Faces>
  53.                 <Face Color = "clOrange " VertexIndexes = "1;0;4;5" />
  54.                 <Face Color = "clFuchsia" VertexIndexes = "2;3;7;6" />
  55.                 <Face Color = "clGreen  " VertexIndexes = "0;1;3;2" />
  56.                 <Face Color = "clBlue   " VertexIndexes = "5;4;6;7" />
  57.                 <Face Color = "clGray   " VertexIndexes = "0;2;6;4" />
  58.                 <Face Color = "clYellow " VertexIndexes = "3;1;5;7" />
  59.             </Faces>
  60.         </Part>

  62.         <Split Axis = "0" From  = "1" />
  63.         <Split Axis = "0" From  = "2" />
  64.         <Split Axis = "1" From  = "1" />
  65.         <Split Axis = "1" From  = "2" />
  66.         <Split Axis = "2" From  = "1" />
  67.         <Split Axis = "2" From  = "2" />

  69.         <Hide Axis = "0" Layer = "0" />
  70.         <Hide Axis = "0" Layer = "2" />
  71.         <Turn Axis = "2" Angle = "Pi / 4" Layer = "0" />
  72.         <Turn Axis = "2" Angle = "Pi / 4" Layer = "2" />

  74.         <Split Axis = "0" From  = "1" />
  75.         <Split Axis = "0" From  = "2" />
  76.         <Split Axis = "1" From  = "1" />
  77.         <Split Axis = "1" From  = "2" />
  78.         <Split Axis = "2" From  = "1" />
  79.         <Split Axis = "2" From  = "2" />

  81.         <Turn Axis = "2" Angle = "-Pi / 4" Layer = "2" />
  82.         <Turn Axis = "2" Angle = "-Pi / 4" Layer = "0" />
  83.         <ShowAll/>

  85.         <Hide Axis = "1" Layer = "0" />
  86.         <Hide Axis = "1" Layer = "2" />
  87.         <Turn Axis = "0" Angle = "Pi / 4" Layer = "0" />
  88.         <Turn Axis = "0" Angle = "Pi / 4" Layer = "2" />

  90.         <Split Axis = "0" From  = "1" />
  91.         <Split Axis = "0" From  = "2" />
  92.         <Split Axis = "1" From  = "1" />
  93.         <Split Axis = "1" From  = "2" />
  94.         <Split Axis = "2" From  = "1" />
  95.         <Split Axis = "2" From  = "2" />

  97.         <Turn Axis = "0" Angle = "-Pi / 4" Layer = "2" />
  98.         <Turn Axis = "0" Angle = "-Pi / 4" Layer = "0" />
  99.         <ShowAll/>

  101.         <Hide Axis = "2" Layer = "0" />
  102.         <Hide Axis = "2" Layer = "2" />
  103.         <Turn Axis = "1" Angle = "Pi / 4" Layer = "0" />
  104.         <Turn Axis = "1" Angle = "Pi / 4" Layer = "2" />

  106.         <Split Axis = "0" From  = "1" />
  107.         <Split Axis = "0" From  = "2" />
  108.         <Split Axis = "1" From  = "1" />
  109.         <Split Axis = "1" From  = "2" />
  110.         <Split Axis = "2" From  = "1" />
  111.         <Split Axis = "2" From  = "2" />

  113.         <Turn Axis = "1" Angle = "-Pi / 4" Layer = "2" />
  114.         <Turn Axis = "1" Angle = "-Pi / 4" Layer = "0" />
  115.         <ShowAll/>

  117.         <Turn Axis = "0" Angle = "Pi / 2" Layer = "0" />
  118.         <Turn Axis = "0" Angle = "Pi / 2" Layer = "2" />
  119.         <Split Axis = "7" From  = "1" />
  120.         <Split Axis = "7" From  = "2" />
  121.         <Split Axis = "8" From  = "1" />
  122.         <Split Axis = "8" From  = "2" />
  123.         <Turn Axis = "0" Angle = "-Pi / 2" Layer = "2" />
  124.         <Turn Axis = "0" Angle = "-Pi / 2" Layer = "0" />

  126.         <Turn Axis = "2" Angle = "Pi / 2" Layer = "0" />
  127.         <Turn Axis = "2" Angle = "Pi / 2" Layer = "2" />
  128.         <Split Axis = "4" From  = "1" />
  129.         <Split Axis = "4" From  = "2" />
  130.         <Split Axis = "6" From  = "1" />
  131.         <Split Axis = "6" From  = "2" />
  132.         <Turn Axis = "2" Angle = "-Pi / 2" Layer = "2" />
  133.         <Turn Axis = "2" Angle = "-Pi / 2" Layer = "0" />

  135.         <Turn Axis = "2" Angle = "Pi" Layer = "0" />
  136.         <Turn Axis = "2" Angle = "Pi" Layer = "2" />
  137.         <Turn Axis = "0" Angle = "-Pi / 2" Layer = "0" />
  138.         <Turn Axis = "0" Angle = "-Pi / 2" Layer = "2" />
  139.         <Turn Axis = "7" Angle = "Pi / 2" Layer = "0" />
  140.         <Turn Axis = "7" Angle = "Pi / 2" Layer = "2" />
  141.         <Turn Axis = "2" Angle = "-Pi / 4" Layer = "0" />
  142.         <Turn Axis = "2" Angle = "-Pi / 4" Layer = "2" />
  143.         <Split Axis = "7" From  = "1" />
  144.         <Split Axis = "7" From  = "2" />
  145.         <Turn Axis = "2" Angle = "Pi / 2" Layer = "0" />
  146.         <Turn Axis = "2" Angle = "Pi / 2" Layer = "2" />
  147.         <Split Axis = "7" From  = "1" />
  148.         <Split Axis = "7" From  = "2" />
  149.         <Turn Axis = "2" Angle = "-Pi / 4" Layer = "2" />
  150.         <Turn Axis = "2" Angle = "-Pi / 4" Layer = "0" />
  151.         <Turn Axis = "7" Angle = "-Pi / 2" Layer = "2" />
  152.         <Turn Axis = "7" Angle = "-Pi / 2" Layer = "0" />
  153.         <Turn Axis = "0" Angle = "Pi / 2" Layer = "2" />
  154.         <Turn Axis = "0" Angle = "Pi / 2" Layer = "0" />

  156.         <Turn Axis = "2" Angle = "-Pi / 2" Layer = "0" />
  157.         <Turn Axis = "2" Angle = "-Pi / 2" Layer = "2" />
  158.         <Turn Axis = "6" Angle = "Pi / 2" Layer = "0" />
  159.         <Turn Axis = "6" Angle = "Pi / 2" Layer = "2" />
  160.         <Turn Axis = "1" Angle = "-Pi / 4" Layer = "0" />
  161.         <Turn Axis = "1" Angle = "-Pi / 4" Layer = "2" />
  162.         <Split Axis = "6" From  = "1" />
  163.         <Split Axis = "6" From  = "2" />
  164.         <Turn Axis = "1" Angle = "Pi / 2" Layer = "0" />
  165.         <Turn Axis = "1" Angle = "Pi / 2" Layer = "2" />
  166.         <Split Axis = "6" From  = "1" />
  167.         <Split Axis = "6" From  = "2" />
  168.         <Turn Axis = "1" Angle = "-Pi / 4" Layer = "2" />
  169.         <Turn Axis = "1" Angle = "-Pi / 4" Layer = "0" />
  170.         <Turn Axis = "6" Angle = "-Pi / 2" Layer = "2" />
  171.         <Turn Axis = "6" Angle = "-Pi / 2" Layer = "0" />
  172.         <Turn Axis = "2" Angle = "Pi / 2" Layer = "2" />
  173.         <Turn Axis = "2" Angle = "Pi / 2" Layer = "0" />
  174.         <Turn Axis = "2" Angle = "Pi" Layer = "2" />
  175.         <Turn Axis = "2" Angle = "Pi" Layer = "0" />
  176.         <RemoveGrayParts/>
  177.     </Figure>
  178. </xml>
复制代码
作者: 不爱pop    时间: 2017-7-13 13:53:31

66666666666666



欢迎光临 魔方吧·中文魔方俱乐部 (http://www.mf8-china.com/) Powered by Discuz! X2